UNICASE同轴减速电机
结构稳固
- Performance: 0.16 HP - 215 HP
- Torque range: 89 lb-inch - 230,119 lb-in
Steel & Metals
Drive solutions for the steel industry
NORD DRIVESYSTEMS supplies well-thought-out, future-proof solutions for all processes in steel and aluminium plants throughout the world, which cater for current and future requirements. NORD drive technology achieves long lifetimes, even under extremely harsh conditions. Even under extreme electrical and mechanical loads, the systems ensure full performance and reliable operation at all times.
Continuous performance
NORD gear units have a number of features that enable trouble-free operation in the demanding environment of the steel industry - robust, efficient and safe.
Stable value
Due to the harsh environment with alternating loads in combination with high ambient temperatures, classic rolling mill motors are used. Some manufacturers and users still consider the "ring-rib motors" an integral part of a rolling mill. Three-phase motors with horizontal cooling fins have also been successfully operated in various rolling mill areas in recent years. Important in this context: The various loads and required acceleration and braking torques of a roller mill are fully included in the calculations!
In addition, it can happen that a slab blocks and is accelerated by only a few rollers, which overloads the respective drives. The main task of the roller table motors is to decelerate and accelerate the slabs, profiles or pipes on the system. Relatively little power is needed in the transport phases with constant speed. Geared motors in steel mills, especially in the rolling mill, are calculated and selected with a high operating factor based on the acceleration torque due to the high acceleration work and the impact loads.
UNICASE平行轴减速电机
结构紧凑，动力强劲
- Performance: 0.16 HP - 268 HP
- Torque range: 974 lb-inch - 885,075 lb-in
UNICASE伞齿轮减速电机
动力强劲
- Performance: 0.16 HP - 268 HP
- Torque range: 1,593 lb-inch - 442,537 lb-in
MAXXDRIVE 工业减速机
工业减速机
- Performance: 2.0 - 8,075 HP
- Torque range: 132,800 - 2,495,900 lbf-in
- 2- and 3-stage
- High strength precision-made one-piece housing
- Modular and flexible design for optimum adaptation to your application
- Low running noise
MAXXDRIVE 直交轴齿轮箱
工业减速机
- Performance: 2.0 - 2,850 HP
- Torque range: 132,800 - 2,301,200 lbf-in
- 3- and 4-stage
- High strength precision-made one-piece housing
- Modular and flexible design for optimum adaptation to your application
- Low running noise
NORDAC FLEX - SK 200E - 变频器
更大的灵活性，更低的成本
- Power range: 0.25 - 22 kW
- Protection class: IP55, IP66
- Wall or motor mounting
- Maximum flexibility thanks to modular structure
NORDAC PRO - SK 500E - 变频器
性能强大，功率范围广
- Power range: 0.25 - 160 kW
- Protection class: IP20
SMS Group GmbH
应用于沙漠中的功能强大的可逆式轧机驱动系统
Bahrain轧钢机的恶劣较端运行条件需要可靠的驱动技术。驱动器必须能够承受温度、高负载和高冲击，同时仍然可靠地连续运行。因此，SMS group GmbH选用了诺德驱动解决方案。
Video: SMS Group GmbH
Have a look at our video of applications of robust NORD drive technology in the steel mill in Bahrain.
Watch video
Find further information here:
Worldwide trade fairs for Steel & Metals:
| Country | Trade Fair | City | Date | Booth | |
|---|---|---|---|---|---|
| RO | Metal Show - TIB | Bucharest | 2024-05-14 - 2024-05-17 | Pavillon B2, Booth 58 |